High Shrink Tubular Sleeves consist of a cross-linked polyolefin backing, coated with an adhesive which effectively bonds to steel substrates and common pipeline coatings including polyethylene and fusion bonded epoxy. Tubular type sleeves are installed before joining the pipe ends by sliding the coat from a free end of the pipe onto the area to be coated. It is designed for corrosion protection of flanges, casings, bell and spigot joints and other high profile couplings.
Specification
XHTS 510/ Ø 89
XHTS 510/Ø 100
XHTS 510/ Ø 108
XHTS 510/ Ø 114
XHTS 510/Ø 159
XHTS 510/ Ø 219
XHTS 510/ Ø 273.1
XHTS 510/ Ø 325
Model: XHTS 510/Ø 60
XHTS------Heat shrinkable wraparound sleeves
510----- ----Roll Width (as supplied)
Ø 60------Joint or pipeline Dimeter )
|
| 
